10
OPERATING INSTRUCTIONS
Make sure the AC power cord from this unit is properly connected to a
110V 60Hz household AC power outlet.
Make sure that the minimum distance around the whole unit for
sufficient ventilation is 10cm.
SETTING THE CLOCK
When the system is connected to the AC outlet for the
first time and “12:00” will keep flashing on the display.
This is your indication that the time display is not set.
1.) Press the
TIME
button and the display will start flashing.
2.) Press
HOUR
or
MINUTE
to adjust the hour digit and minute digit respectively.
3.) Press the
TIME
button again to confirm and the clock begin to run.
4.) The time is defaulted in 12 hour format. The PM indicator will light up when it is
afternoon.
SLEEP FUNCTION
This system includes a programmable sleep timer that allows you to set the unit to
turn off between the 5 minutes to 2 hours
1.) Sleep function can only be operated under
OFF
and
AUTO
mode.
2.) Slide the
FUNCTION
switch to either
OFF or AUTO
mode.
3.) Press the SLEEP button and the iPod will turn on and start playing and the
default sleep time will show on the display.
4.) The sleep time is default at
2
hours, press the
SLEEP
button to change the
sleep time. The sleep time will change in following order every time you press
the
SLEEP
button: 2:00 > 1:30 > 1:00 > :30 > :20 > :10 > :05 > -:-- minutes
