13
1) Alarm Function will only activate on ON mode
2) Slide the
FUNCTION
switch to
ON
position.
3) Plug the iPod to the iPod docking station. If the iPod is in PAUSE mode before
plugged in, the iPod will playback itself once plugged into the docking station.
If the iPod is in PLAY mode before plugged in, the iPod will changed into
PAUSE mode once plugged into the docking station. Then press
PLAY/PAUSE
button to start music playback.
4) Press PLAY/PAUSE button on top panel or remote control to control play and
pause function.
5) Press the / VOLUME – button on top panel or remote control to
adjust the VOLUME
level of this unit as desired.
6) Press
BASS +
/
BASS –
on the remote control to adjust the BASS level, it will
enhance/reduce the BASS effect and the display will show the range of
b:03
to
b:-3
.
7) Press T
REBLE + / TREBLE –
on the remote control to adjust the BASS level,
it will enhance/reduce the TREBLE effect and the display will show the range
of
t:03
to
t:-3
8) When iPod video is plugged into this unit, the video can be viewed from other
display by connecting the
VIDEO OUT
jack to the desired video display ( video
connection cable is not included).
Remarks: Please make sure the TV Out is set to ON in the iPod
Video
Setting menu. Otherwise the video signal will not be able to show
on the display. (For detail, please check the iPod
Video
Instruction Manuel.)
Control iPod
menu by REMOTE CONTROL only
Press MODE button on the remote control, the iPod
will go to the previous menu.
Press IPOD UP/ IPOD DOWN button on the remote control to select up or down
of the iPod
menu; then press the ENTER button to enter selected menu.
iPod
CHARGING
If the iPod
is connected to the unit, iPod
will charge automatically in any mode.
