©Isothermal Technology
Page 12 of 61
914 millisKanner manual Iss. 1.00
2.2
2.2
2.2
2.2
Connecting a Single millisKanner to a milliK
Connecting a Single millisKanner to a milliK
Connecting a Single millisKanner to a milliK
Connecting a Single millisKanner to a milliK
Using the null modem cable provided (see section 8.1 if you wish to make your own
cable), connect either of the RS232 ports on the millisKanner to either RS232 port on the
rear of the milliK (it does not matter which port is used as they are completely
interchangeable). Connect the five Output Terminals on the rear of the millisKanner to
Channel 2 of the milliK, using the link cable provided, carefully observing the colour
coding shown (note: the white wires must be connected to the V+/V- terminals):
