©Isothermal Technology
Page 50 of 61
914 millisKanner manual Iss. 1.00
8.2.6.1
8.2.6.1
8.2.6.1
8.2.6.1
Com
Com
Com
Command: REMote
mand: REMote
mand: REMote
mand: REMote
Format: REMote
Sets the millisKanner for remote (RS232) control only and disables local controls
(left/right buttons). The millisKanner always starts in local mode.
Example: to prevent the user from controlling the millisKanner using the left/right
buttons, send
REM
.
8.2.6.2
8.2.6.2
8.2.6.2
8.2.6.2
Command: LOCal
Command: LOCal
Command: LOCal
Command: LOCal
Format: LOCal
Re-enables local controls (left/right buttons). The millisKanner always starts in local
mode (as if
LOC
had been sent).
Example: to re-enable the left/right buttons (after they have been disabled by sending
REM
), send
LOC
.
8.2.6.3
8.2.6.3
8.2.6.3
8.2.6.3
Command: *IDN?
Command: *IDN?
Command: *IDN?
Command: *IDN?
Format: *IDN?
Reports information on the millisKanner in 4 comma separated fields:
manufacturer
model
serial number
firmware version
Example: for a millisKanner with serial number 13-P525 using firmware version 1.00, the
millisKanner responds to
*IDN?
with:
