©Isothermal Technology
Page 6 of 61
914 millisKanner manual Iss. 1.00
!
1.2
1.2
1.2
1.2
Safety
Safety
Safety
Safety
The millisKanner is a precision instrument, designed for use in a laboratory. It complies
with the requirements of safety standard EN61010-1 (2010) and is therefore safe to use
in laboratory or light industrial environments. It is not intended for use outdoors or in
extreme environments (refer to specification in Section 9).
The millisKanner is likely to be connected to thermometer sensors in use and the
operator should take care to ensure that the complete system is safe. For example, metal
sheathed thermometers may be connected to the millisKanner and then placed in a
furnace powered from a 230V electrical supply. Single fault conditions in such a furnace
could lead to the thermometer wires and therefore the binding posts and output
connectors of the millisKanner becoming electrically live and therefore a hazard to the
operator. Suitable precautions should be taken, such as using an isolating transformer in
the supply to such a furnace. If you require further advice on safety issues, please
contact Isothermal Technology or one of our appointed distributors - we have extensive
experience of thermometry and can provide advice and equipment to help you.
Retain these instructions. Use only as specified in these operating instructions or the
intrinsic protection may be impaired.
Please observe the following safety precautions:
Do not use your millisKanner if it is damaged
Connect only to a power supply with a voltage corresponding to that on the power
supply label (also given in the specification – see Section 9)
This equipment is for indoor use and will meet its performance figures within an
ambient temperature range of 5°C to 40°C with maximum relative humidity of 80%
