IPBridge Installation Guide
Page 38
7.5
: 1 DOOR & 1 IP CAMERA
In Figure 26, access-control for a single door and an IP-camera are being
supported from a single Cat5/6 cable run. A PoE-Plus injector is providing the
power required.
Items of note include:
Connections from the door components are the same as described in
example 7.4, including:
o
PoE Plus is providing power for door access and IP camera
o
Standard lock strike is being used.
12VDC is powering the lock strike.
o
A door sensor switch is installed
o
Wiegand device is at the door
Figure 26
