IPBridge Installation Guide
Page 37
The table below describes each door’s connections.
Terminal
Block
Connection
Identifier
Description
I/O
DS
Connected to the Door Sensor at the door.
I/O
COM
Connected to the “DC” terminal, which supplies 12VDC
for the locks
I/O
NO
Connected to the Door Lock
I/O
DC
Connected to the “COM” terminal to supply DC power to
the lock, thru the Lock Relay
I/O
GND
Provides return for all connections from the door.
Wiegand
Device
GND
Provides return for all connections from the door.
Wiegand
Device
DC-R
Output:
Supplies regulated 10 VDC for the Wiegand device.
Wiegand
Device
W0
Input.
Wiegand data “0” input lead, from the Wiegand device
Wiegand
Device
W1
Input.
Wiegand data “1” input lead, from the Wiegand device