IPBridge Installation Guide
Page 19
Terminal
Block
Connection
Identifier
Purpose
I/O
DC
Output:
When IP-Bridge is powering from PoE, the “DC”
terminal supplies regulated 12 VDC.
When IP-Bridge is powering from 12 or 24 VDC, the
“DC” terminal supplies the voltage that is input to the
IP-Bridge.
I/O
GND
Common Ground
Connects with all ground terminals on the IP-
Bridge terminal blocks and coaxial cable
Reader
GND
Common Ground
Connects with all ground terminals on the IP-
Bridge terminal blocks and coaxial cable
Reader
DC-R
Output:
Supplies regulated 10 VDC.
Reader
N/A
Not Used
Reader
AUX
Logic Input
Default Action: When connection to “Gnd” is completed,
the input goes active.
Action can be reversed in the configuration.
Reader
BP
Output:
Allows control of the Wiegand device’s beeper.
{Future Use}
Reader
W0
Input.
Connects to Wiegand data “0” from Wiegand device
Reader
W1
Input.
Connects to Wiegand data “1” from Wiegand device
Reader
GR
Output:
Allows control of the Wiegand Green LED.
{Future Use}
Reader
RED
Output:
Allows control of the Wiegand Red LED.
{Future Use}
