INSTALLATION MANUAL · iSmartGate 01W ·
English / REV.3
18
iSmartGate-01W
www.
v2fe
.com
4. How it works
In order to configure the
iSmartgate-01W
parameters, you have to use the
three buttons
and use them according
to the information appearing on the
display.
· BUTTON 1: SEL
Selection Function:
It will help you navigate through the different available options.
· BUTTON 2: CANCEL/BACK/MODIFY
This button will allow you to go back to the main menu or the previous selected option.
When we are typing data, this button rotate the alphanumeric value.
· BUTTON 3: OK
Confirmation button.
Once you press it, you will either enter in the selected option,
or accept the selected parameters.
4.1. GateName, Password, Port, Ipcast, and working Mode configuration
In order to control the
iSmartgate-01W
with our smartphone, it is important to ensure a secure connection
between them, avoiding third party equipments the access to it. To provide this safety connection, the iSmart-
gate-01W needs to have the following parametres completed successfully;
·
GateName:
The door's name
·
Password:
Numeric password to access the door control
·
Port:
Network Port using the TCP/IP communication.
·
Working Mode:
"Garage", "Pulse", or "On/Off".
Those 4 parameters, all together, will create a unique code that will be used to encript all the communications.
This is why those 4 parameters need to be introduced exactly the same way on the
iSmartgate-01W
and
our smartphone.
Aditionally, you will also have to configure your network's IP broadcast to ensure that the device can transmit
correctly.
(See section 4.6)
Once the iSmartgate is switch on, the display screen will inform you about all the selected configurations.
Reminder:
