INSTALLATION MANUAL · iSmartGate 01W ·
English / REV.3
13
iSmartGate-01W
www.
v2fe
.com
Figure 10. Seaching the iSmartgate
3.2. Step 2: Find the iSmartgate-01W on your LAN network
Once the
iSmartgate-01W
is connected to the AP or WI-fi router and switched on, we will use a computer connected
to the same network in order to find it and therefore configure the iSmartgate device.
You have to connect through the ethernet, your PC to the AP or Wi-fi router.
In order to access to the iSmartgate-01W internal configuration, you will need to use
Digi Device Discovery
(if you don't have it, you can download it at www.v2fe.com).
Then you need to run the program, by clicking "
dgdiscvr.exe
"
(Digi Device Discovery is owned by Digi Inc.)
In case the
iSmartgate-01W
device does not appear on the screen, please wait for 5 minutes and if it still is not
showing up on the screen, click on "Refresh View". If you have repeatedly searched the
iSmartgate-01W
with no
success, it may be connected to another open network, not ours, this means that you need to go back to step 1 and
start the process again.
If you have found the iSmartgate-01W, please move on to step 3.3.
