INSTALLATION MANUAL · iSmartGate 01W ·
English / REV.3
10
iSmartGate-01W
www.
v2fe
.com
Once you have your smartphone connected to the iSmartGate-01W and configured with the
PUL (Pulse) MODE
,
you will be able to raise or lower the blinds, awnings or curtains as explained below:
· As far as you tap
OPEN
and keep it pressed, the element (blind/awning, curtain) will keep lifting up, as
RELAY 1
(open)
will be activated. As soon as you stop tapping the OPEN button, the OPEN action will be stopped.
· When pressing
CLOSE
, the opposite happens: the element (awning, blind, curtain) will start going down, as
RELAY 2 (CLOSE)
will be activated. As soon as you stop tapping the CLOSE button , the action will stop.
2.2.3 iSmartGate ON/OFF Mode Wiring
Last, let's see how the
iSmartgate-01W
can also be configured as a ON/OFF mode (O/O).
Using this mode, you will be able to control the on and off of domestic elements such as lighting elements, electric
appliances, etc..
ON/OFF Mode
allows the iSmartGate-01W to switch indepently 2 different LOADS (on and off).
· When you tap
OPEN
on the iSmartgate App on your smartphone, the
LOAD connected to Output1 will go ON
.
When tapping
OPEN again
, the
LOAD connected to Output1 will go OFF.
· When you tap
CLOSE
on the iSmartgate App on your smartphone, the
LOAD connected to Output2 will go ON.
When tapping
CLOSE
again, the
LOAD connected to Output2 will go OFF.
You need to install it as the
Figure 8
shown below:
Figure 8. Load control in MODE ON/OFF
L
N
LOAD 1
LOAD 2
iSmartGate-01W
LED STATUS
LED OUTPUT 1
LED OUTPUT 2
P.E N L
110/220AC
SEL BACK OK
RELAY 1
RELAY 2
Wi-Fi
