INSTALLATION MANUAL · iSmartGate 01W ·
English / REV.3
17
iSmartGate-01W
www.
v2fe
.com
If you are reading this section, it means that after trying to configure both
iSmartGate-01W and AP
, with our SSID
and security settings,
it has not been possible to connect them.
Firstly, it is really important to be sure that you have typed exactly
the same SSID and password on both network
devices
(AP or Wi-fi router and iSmartgate Device).
At this stage, it is not possible to access the
iSmartGate-01W
, as it will try to connect to a network which will
have incorrect SSID or password.
Therefore, you will need to RESET the iSmartGate Device to the default factory settings:
1.
Press the SEL button on the iSmartgate-01W until the display shows:
"6-ResNet"
2.
Press OK
3.
You will be asked again if you are sure to RESET the network configuration. Press OK.
4.
You will be asked again if you are sure to do so. Press OK.
5.
Wait until the iSmartGate-01W restarts.
At this moment, the iSmartgate-01W will start again to search for an open Wi-fi network to connect.
Please go back to section 3.1.
3.6. Troubleshooting Guide
