ISHIDA SR-2000 alpha Page 40 User Manual Download

Page: 40 / 153

Chapter 2 OPERATION MODE

2.11 AUTOMATIC / ADVANCED LABELING

Automatic labeling can be performed both for weighing products and fixed price products.
However, advanced labeling can be performed only for fixed price products.

Automatic Labeling for Weighing Products

Confirm that [PREPACK] is
selected on the screen.

If not, touch [MANUAL] to change
to [PREPACK].

Enter the PLU number (Weighing
product) and press the PLU key on
the keypad.

Example: PLU No. 3

Place the weighing product on the
weighing platter.

When the weighing becomes
stable, the label is issued.

Then, the machine return to
[MANUAL] status.

2-18

SR-2000

User’s Manual (No. 0000A)

Summary of Contents for SR-2000 alpha


























































































































































Search results

Summary of Contents for SR-2000 alpha

Reviews:

Related manuals for SR-2000 alpha

Brands by name

Popular brands

ISHIDA SR-2000 alpha, User Manual

Search results

Summary of Contents for SR-2000 alpha

Reviews:

Related manuals for SR-2000 alpha

Brands by name

Popular brands