37
2.1.BRAKE PEDAL
The brake pedal, when pressed, causes the Zero turn
mower to stop moving.
2.2.PARKING BRAKE LEVER
Use the parking brake lever when parking the Zero turn
mower. Depress the brake pedal and push down the
lever to apply the parking brakes.
When releasing the parking brake, depress the brake
pedal.
IMPORTANT. Never start travelling with the parking
brake applied, or the brake performance
will deteriorate soon or, even worse, the
brake system could break down.
The alarm buzzer will sound off when the drive control
lever is manipulated while the parking brake is
engaged.
CAUTION: When leaving the Zero turn
mower, be sure to apply the parking brake.
2.3 DRIVE CONTROL LEVER
Manipulate these control levers to move the Zero turn
mower forward or backward.
To move forward, push both control levers.
To move backwards, pull both control levers.
Adjust the forward (backward) speed by adjusting the
amount of push (pull) on these levers.
To increase speed, increase the amount of pull (or push)
on the levers. To slower down, decrease the amount of
pull (or push) on the levers.
To move straight:
To move straight ahead, set the push amounts of both
levers to be equal. To move straight backwards, set
the pull amount of both levers to be equal.
To turn left:
To turn left, increase the amount of push on the right
control lever.
(1)
Drive control lever (LH)
(2)
Drive control lever (RH)
1
2
FIG. 31
FIG. 32
CHAPTER 5. CONTROLS AND METERS
Summary of Contents for SZ330
