10
2.13. When your Zero turn mower is equipped with an
implement other than a standard mower deck,
never fail to ask your dealers about machine bal-
ance. Always follow their advice.
2.14. Keep in mind that the operator or user is responsi-
ble for the accidents or hazards caused by the Zero
turn mower to other people or their property.
2.15. Inspect the Zero turn mower for wear or damage.
Replace any worn or damaged parts.
2.16. Especially before starting the mower, be sure to
perform advised pre-operation inspections especial-
ly on the brakes and inspect visually to see that the
blade and blade tightening nuts are not worn, dam-
aged or loose. Replace worn or damaged blade and
nuts as an assembly to preserve blade balance.
Otherwise, poor braking or scattered broken blades
may result, which is very dangerous.
2.17. When operating the Zero turn mower equipped with
attachment which is not ISEKI made at the slope,
be sure to equip with Zero turn mower with balance
weights. Order the following parts to secure your
safety at the slope and install suitable weights with
the Zero turn mower.
2.12.
•Front hitch (Opt.)
2.12 .
(1725-433-003-0A)...........................1pc
2.12
If you have any question, please consult your dealer.
2.18. Machine weight balance is a very important factor
for safe operation. When your machine is equipped
with an implement, never fail to ask your dealers
about machine balance. Always follow their advise.
ZERO TURN MOWER
Summary of Contents for SZ330
