In display mode VI-MEAS the following can be seen:
If a channel is switched off, the values of V
meas
and I
meas
are grey.
If a channel is in constant voltage regulation, V
meas
value is white and I
meas
value is grey
If a channel is in constant current regulation, V
meas
value is grey and Imeas value is white
The channel row which is slightly brighter (in image channel 4) is the marked channel by the rotary encoder. Turning the
rotary encoder counter-clockwise will mark the channel above the current channel and turning clockwise will mark the
channel below the current channel.
3.2.2. Menu Screen
By pressing the left button in Main screen, the display will switch to the menu screen, that looks similar to the image
below:
back to Main screen by pressing left button
The menu screen shows menu entries to set up behavior and check information of the device hardware.
To enter a menu entry, the user has to mark an entry by turning rotary encoder and then pressing the rotary encoder
button. The selected entry is then shown in the menu path.
back to menu screen
NHR – NIM standard High Voltage Power Supply | Last changed on: 25.11.2019 |
www.iseg-hv.com
14/31
menu entry list
subentries
menu path
