3.2.5. Channel Details
To change the set values of a channel or to monitor one single channel with larger digits, the Channel screen needs to be
entered. This can be done in Main screen by turning the rotary encoder until the wished channel is marked and then
pressing the rotary encoder button to select it. A screen similar to the following will be shown.
back to Main screen
switch screen between set and measured values
with left button
with right button
NHR – NIM standard High Voltage Power Supply | Last changed on: 25.11.2019 |
www.iseg-hv.com
17/31
selected channel with its running and regulation
state (constant voltage / constant current)
set (orange) or measured (white) values of voltage
and current of the selected channel
selected screen: set or measurements
