3.2.4. Editing Menu Entries
A Menu entry that has a fixed amount of possible values can be easily edited by turning the rotary encoder, the selected
value will be shown at the bottom of display screen.
A submit and save of the selected value is done by pressing the rotary encoder button.
A reset to its default value is done by pressing the right button.
A menu entry with a none-fixed amount of values e.g. voltage ramp speed is edited a little bit different.
The selected value is also shown at the bottom of the display but with a digit hilighted by a cursor. A short press on the
rotary encoder button and the cursor will jump to the next lower digit. Turning the rotary encoder changes the selected
value in the resolution of the corresponding digit.
A submit and save of the selected value is done by pressing and holding the rotary encoder button for more than one
second.
NHR – NIM standard High Voltage Power Supply | Last changed on: 25.11.2019 |
www.iseg-hv.com
16/31
current value
selected value
