3.2 Front Panel Control
Context sensitive
buttons left and right for navigation inside the menus
Display
shows monitor and control values
Rotary encoder
with push button to navigate in menu and set values
LED „OK“
signals condition of the corresponding channel
LED „HV ON“
signals a measured output voltage at the corresponding channel
LED „POS“
and
„NEG“
indicate the selected polarity of the corresponding channel
On/Off switches
to turn the corresponding channel on or off
Hardware limit
set screws Vmax and Imax to set the maximum output voltage or current
relatively to the absolute maximum values of the channel (Vnom / Inom)
USB
and
Safety Loop
connector
CAN
connectors
Single channel Inhibit
connector
NHR – NIM standard High Voltage Power Supply | Last changed on: 25.11.2019 |
www.iseg-hv.com
12/31
