7
|
Raptor Panels Description
IM-Raptor-1.3.6-EN
3.1 Front Panel Elements
SD cover elements (a sample is shown on right) can vary.
1. SD Card
A SD Card port may be used to store syslogs. SD#1 (top) is disabled by default. SD slot #2 (bottom) is available for
customer use.
2. Management Port
This 10/100Base-T Ethernet port is used as an out-of-band factory service port. It is disabled by default and not available
for user access.
3. RS232 Serial Console Port
This port is for interfacing directly with the device and accessing management functions via serial interface.
4. USB Port
The USB port can be used to upgrade or back up the Raptor's
software or configuration files.
5. Power Status LEDs
The light-emitting diodes (LED)s indicate the status of the power supply modules.
6 & 7 Power Supplies 1 and 2
Two power supplies may be used for redundancy.
