INSTALLATION GUIDE
|
12
IM-Raptor-1.3.6-EN
To secure the device to a standard 48 cm (19 in) rack, perform the following:
Step 1: Install the mounting brackets to Raptor using 4 x M4 x 0.7 screws on each side (screws will be provided with the
switch). Use minimum of 2 brackets (4 brackets are included). Brackets are to be adjusted based on rack dimensions.
Step 2: Place the switch in the rack by tilting the switch at an angle so that the ears will clear the mounting rails. Mount it
on the rack using rack screws at the front and rear brackets.
4.7
Equipment Needed for Raptor's Installation
PART #
DESCRIPTION
QTY
1
Mounting screw M 4 x 0.7
16 (included)
2
Mounting bracket
4 (included)
3
Screwdriver
1 (not included)
