IS5 COMMUNICATIONS RAPTOR Series, User Manual

Page: 4 / 38

4.5.1 Electrical / Mechanical Hazards Prevention . . . . . . . . . . . . . . . . 11
4.5.2 Humidity and Dust Hazards . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.6 Mounting Raptor on a Rack . . . . . . . . . . . . . . . . . . . 11
4.7
Equipment Needed for Raptor's Installation . . . . . . . . . . . 12
5. Modules Installation . . . . . . . . . . . . . . . . . . . 13
5.1 Power Supply Modules Installation . . . . . . . . . . . . . . . 13
5.2
Removal of Power Supply Modules from Chassis . . . . . . . 14
5.3 Line Modules Installation. . . . . . . . . . . . . . . . . . . . . 15
5.4
Removal of Line Modules from Chassis . . . . . . . . . . . . . 16
5.5 iRM-4TGSFP Module Installation . . . . . . . . . . . . . . . . 17
5.6
Removal of iRM-4TGSFP Module . . . . . . . . . . . . . . . . 18
5.7 Inserting SD Card in SD Slot . . . . . . . . . . . . . . . . . . . 19
5.8 Removing SD Card . . . . . . . . . . . . . . . . . . . . . . . . 20
6. Electrical Wiring . . . . . . . . . . . . . . . . . . . . . . 20
6.1 Power Inputs and Fault Relay . . . . . . . . . . . . . . . . . . 20
6.2 Connecting AC Power. . . . . . . . . . . . . . . . . . . . . . . 21
6.3 Connecting DC Power. . . . . . . . . . . . . . . . . . . . . . . 22
6.4
Connecting Ground Wire for Safety Precautions . . . . . . . . 23
7. Device Management . . . . . . . . . . . . . . . . . . . 24
7.1 Serial Console . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
7.2 Ethernet Ports & Communication Cabling. . . . . . . . . . . . 24
7.3 RJ45 Ethernet Pinouts . . . . . . . . . . . . . . . . . . . . . . 24
7.4
Recommendations for Cables in High Electrical Noise . . . . . 26
IM-Raptor-1.3.6-EN
| Table of Contents