IS5 COMMUNICATIONS iRBX6GF, User Manual

Page: 105 / 126

iRBX6GF User’s Manual
UM-iRBX6GF-4.5.1-EN.docx Pages 98 of 119
10.2 Redundancy
Figure 29 – Redundancy Interface
Redundancy Mode
The two redundancy protocols specified by IEC 62439-3 [3] are:
•
PRP (Parallel Redundancy Protocol)
•
HSR (High-availability Seamless Redundancy)
Figure 30 – Redundancy Mode Interface
The following table describes the labels for the
Redundancy Mode Interface
screen.
Label Description
HSR
HSR
is the default redundancy protocol option. If you want to switch to another
redundancy mode, click one of the boxes below.
PRP
To switch to
PRP
, add a checkmark to the box adjacent to the label.
HSR-PRP-A
To switch to
HSR-PRP-A
for LAN A (Dual RedBox A), add a checkmark to the box
adjacent to the label.
HSR-PRP-B
To switch to
HSR-PRP-B
for LAN B (Dual RedBox B), add a checkmark to the box
adjacent to the label.