IS5 COMMUNICATIONS iRBX6GF User Manual Download Page 2

Page: 2 / 126

iRBX6GF User’s Manual

UM-iRBX6GF-4.5.1-EN.docx

COPYRIGHT

NOTICE

No part of this publication may be reproduced in any form without the prior written consent of iS5

Communications Inc. (iS5).

TRADEMARKS

iS5Com is a registered trademark of iS5. All other trademarks belong to their respective owners.

REGULATORY COMPLIANCE STATEMENT

Product(s) associated with this publication complies/comply with all applicable regulations. For more

details, refer to the

Technical Specifications

section.

WARRANTY

iS5 warrants that all products are free from defects in material and workmanship for a specified warranty

period from the invoice date (5 years for most products). iS5 will repair or replace products found to be

defective within this warranty period including shipping costs. This warranty does not cover product

modifications or repairs done by persons other than iS5-approved personnel, and this warranty does not

apply to products that are misused, abused, improperly installed, or damaged by accident.
Refer to the

Technical Specifications

section for the actual warranty period(s) of the product(s) associated

with this publication.

DISCLAIMER

Information in this publication is intended to be accurate. iS5 shall not be responsible for its use or

infringements on third-parties because of the use of this publication. There may occasionally be

unintentional errors on this publication. iS5 reserves the right to revise the contents of this publication

without notice.

CONTACT INFORMATION

iS5 Communications Inc.

1815 Meyerside Dr., Mississauga, Ontario, L5T 2A3

Tel: + 905-670-0004 // Fax: + 289-401-5206

Website:

www.iS5Com.com

Technical Support

E-mail:

[email protected]

Sales Contact

E-mail:

[email protected]

Summary of Contents for iRBX6GF































































































































Search results

Summary of Contents for iRBX6GF

Reviews:

Related manuals for iRBX6GF

Brands by name

Popular brands

IS5 COMMUNICATIONS iRBX6GF, User Manual

Search results

Summary of Contents for iRBX6GF

Reviews:

Related manuals for iRBX6GF

Brands by name

Popular brands