IS5 COMMUNICATIONS iRBX6GF, User Manual

Page: 116 / 126

iRBX6GF User’s Manual
UM-iRBX6GF-4.5.1-EN.docx Pages 109 of 119
Control and LLDP Neighbor Table
Figure 42 – LLDP Interface
The following table describes the labels for the LLDP Interface screen.
Label Description
Control
Enable
To enable LLDP, check the box adjacent to the
Enable
label. By default,
LLDP is enabled. Enabling LLDP operation causes the switch to:
•
Use active, LLDP-enabled ports to transmit LLDP packets describing
itself to neighbor devices.
•
Add entries to its neighbors table based on data read from incoming
LLDP advertisements.
LLDP Neighbor Table
Local Port
This is a read-only value of PORT5. This is the LLDP interface. "Local," means
assigned locally by LLDP.
Remote Chassis Name
This is a read-only field (e.g. it shows iES22GF)
Remote Chassis Desc
This is a read-only field as shown above.
Remote MAC
This is a read-only value of e8:e8:75:00:08:5a. This is an ChassisID, where
the chassis ID subtype is the MAC address of the switch.
Remote IP
This is a read-only field (e.g. 198.168.20.22).
Remote Port Index
This is a read-only field (e.g. 3)
Remote Port Id
This is a read-only field (e.g. 7)
Remote Port Desc
This is a read-only field with (e.g. port)
Reload
Click to undo any changes made locally and revert to the saved ones.