iRBX6GF User’s Manual
UM-iRBX6GF-4.5.1-EN.docx
Pages 29 of 119
DEVICE MANAGEMENT
To control the iRBX switch, use the following options:
•
SNMP
—through Mgmt / Inband port
•
—RS-232 Serial interface
•
WebUI—through Mgmt/Inband port
9.1
Configuration Parameters
The following parameters are preserved across restarts and might be changed through a management
interface.
Table 15 – Configuration Parameters
Parameter
Description
Factory Default
hostname
Set system's network name
irbx
IP Address,
IP Mask,
Switch Management
IP address configuration
192.16810.1
255.255.255.0
Mode
Switch Redundancy protocol mode: HSR or PRP
HSR
SSH
Secure Shell Protocol
disabled
SNMP
Simple Network Management Protocol
enabled
9.2
SNMP
The iRBX6GF switch supports MIB which defines the Network Management interfaces for the
redundancy protocols defined by the IEC 62439 suite including Simple Network Management
Protocol (SNMP). SNMP v1 is supported. Standard SNMP browser can be used to manage iRBX6GF
by using standard IEC-62439-3_Ed2 mib file.
9.3
Command Line Interface Setup
CLI Management is performed by RS-232 Serial Console (115200, 8, none, 1, none). Before
configuring RS-232 serial console, connect the RS-232 port of the switch to your PC. Follow the steps
below to access the console via a RS-232 serial cable.
1.
Start
Tara Term
VT
(or other terminal emulator) application.
or the app from Command Prompt
2.
Go to
Setup
menu and select
Serial Port
.
