15
6) Mount the rear anchoring legs (left
and right side) as you see in pict.10
Place the leg as in the picture and fix it
with the pin pos 35 pict 15 and fix the
jack with the pin 23 pict 10
7) Assemble the sprinkler cart as in all the pictures 17. When the cart is fully assembled control the
position of the bottom of the central pipe point 29 and the pe hose connection pipe: they have to be
close to the ground but don’t touch it. In case those parts touch the ground adjust the legs higher.
Picture 17g: when assembling the cart
pay attention to the position of the flange
indicated by the yellow arrow.
The square pipe directly welded
on the flange has to be on top side.
This way the legs will be angled as shown
by the red arrows.
39. Concrete ballast, if available,
on cart leg, pict. 17a
39. Concrete ballast, if available,
on cart central hook, pict. 17b
Summary of Contents for Silver Series
Page 5: ...5 ...
