Ironwood SLR305 | User Manual
13
6.0 Assembly
6.1 Install Saw Blade
PARTS
REQUIRED: TOOLS
REQUIRED:
• Saw
blade • Saw arbor wrench
• Open-ended wrench
Before installing the saw blade, make sure the diameter of the saw
blade is correct. Refer to the drawing below:
D=254mm (10")
305mm (12")
ø25.4
ø
D
1. Loosen the saw arbor locking lever.
2. Open the blade access door.
Saw arbor lock lever
3. Raise the saw arbor by turning the saw arbor handwheel
so there is ample room for installing the saw blade without
touching the feed chain.
4. Loosen the wing nuts on the small pressure rollers and move
them away from the saw blade position.
5. Open the rear door and fit the supplied saw arbor wrench into
the cross slot on the pulley for securing the saw arbor.
Saw arbor wrench
6. Loosen the hex bolt securing the lock washer/hub and remove
the hub.
7. Mount the saw blade with the teeth pointing in the same
direction as the rotation of the arbor (counterclockwise).
CORRECT
WRONG
Handwheel
8. Reinstall the lock washer/hub, securing with the supplied
hex bolt.
NOTE: Ensure the saw blade and hub are clean and free of any oil or
debris before installing the saw blade.