Ironwood SLR305 | User Manual
5
1.6 Safety Considerations
For your safety, read these instructions thoroughly before you install
and operate this machine. Always have these instructions available
at the machine for reference.
Observe all codes and regulations that apply to the installation and
operation of this machine.
Keep visitors at a safe distance from the work space.
Keep children away from this and all machines. Childproof your work
area!
Familiarize yourself with the safety notices used in this manual.
Caution
If cautions are ignored, personal injury and/or machine damage
may result.
WaRninG
If warnings are ignored, serious injury or death may result.
Warning Labels
This machine has warning labels attached to ensure safe operation.
These warning labels are very important and should be kept clean
and never removed. If warning labels become damaged or lost,
contact Stiles Machinery immediately for replacements.
Label 1: Hazardous voltage label
Label 2: Danger, sharp saw blade
Label 3: Warning – Feed workpiece from this end
Label 4: Warning – do no stand in the cut line
Label 5: Safety instructions
Label 6: Notice – power will not start without the door closed
Label 7: Direction of saw rotation
Label 8: Warning – Entanglement hazard/pinchpoint
WaRninG
Never use the SLR305 for purposes other than its intended use. Do
not modify or remove any guards or other safety features. Improper
use or modifications may affect your warranty or result in serious
injury or death.
Training
This machine is intended for use by authorized, well-trained
operators only.
Do not operate until you have a complete working knowledge of the
machine have been properly trained for its safe operation, correct
adjustment, and use. All operators should thoroughly read and
understand this manual and the workings of this machine prior to
operation.
It is essential that all operators be aware of the following:
• The dangers associated with the operation of this machine.
• The use of personal protective equipment for ear and eye
protection.
• The proper positioning of the operator and operator’s hands
relative to the saw blade.
• The principles of machine operation.
• The safe handling of the workpiece when cutting.
• The safe stacking of the workpiece before and after cutting.
LABEL NO. 1
LABEL NO. 2
LABEL NO. 3
LABEL NO. 4
LABEL NO. 5
LABEL NO. 6
LABEL NO. 7
LABEL NO. 8
N O T I C E
The power will not be started
if you did not close the safety
door at first.
Direction of
saw’s revolution
SAFETY INSTRUCTIONS
1. Do not operate the machine until
all guards are in place.
2. Make sure the machine is properly
ground.
3. Do not wear loose clothes, neckties.
Pull up the long hair.
4. Remove all accessories such as
rings, watch and bracelets, etc.
5. Wear safety glasses and other
personal safety equipment.
6. Unplug electric power before
servicing.
7. Do not leave machine running
unattended.
8. Refer to instruction manual for
complete setup, operating and
servicing.
Feed Workpiece from
This End
WARNING
