Page 6 of 15
SLIDE-AWAY
Installation Guide
©Copyright 2021 Ironman 4x4 Pty Ltd. No part of this publication may be reproduced or replicated without the prior written consent of Ironman 4x4 Pty Ltd
7.
Attach side tracks to main drum.
a) Align slot in bottom of side track
with the locator on the end of the
main drum.
b) Start sliding track on, but do not
pull all the way back.
c) Check the end of the sliding cover.
There is a plastic interface that
slides into a cut out on the vertical
inside face of the side track.
d) Ensure the end of the sliding cover
is located in the track before
pushing all the way back.
The five metal fingers should be
sitting above the sliding cover.
e) Repeat for the opposite side.
