Page 12 of 15
SLIDE-AWAY
Installation Guide
©Copyright 2021 Ironman 4x4 Pty Ltd. No part of this publication may be reproduced or replicated without the prior written consent of Ironman 4x4 Pty Ltd
Wiring
Power Routing Notes:
1. Recommend wiring route path is engine
compartment » wheel trims » bed.
2. Most vehicles already have holes in bed.
If available, route cabling through exiting
holes. For vehicles without access, a 20mm
diameter hole is recommended. Remember
to corrosion proof hole after drilling.
3. Please make sure wiring route avoids
engine housing, exhaust pipes, and other
hot or moving components on the vehicle.
The wiring route of power cable is shown in red.
Optional In-Car Button
The optional in-car activation button can be
connected. The Slide-Away will function without
this.
If connected, find an appropriate position in the
dash (or other location INSIDE the cabin), and
mount the button.
Route wiring back to the Slide-Away main drum,
and connect to the plug.
Yellow Wiring Loom
At present, the yellow wiring loom’s functions
are not supported. This does not need to be
connected.
+ -
Red with positive
Plug into the connector
Black with negative
