Page 11 of 15
SLIDE-AWAY
Installation Guide
©Copyright 2021 Ironman 4x4 Pty Ltd. No part of this publication may be reproduced or replicated without the prior written consent of Ironman 4x4 Pty Ltd
12. Install Drain Tubes
NOTE
- Consider positioning of drain
tubes in relation to items that will
be loaded into the tub, so as not to
create snag points.
a) Attach using hose clamps (
A10
)
the small drain tubes (
A5
) to rear
of the tracks, and the large tubes
to the underside of the drum.
b) As needed, bore holes through
the ute tub using the supplied bit
(
A19
).
c) Coat all holes with a cold
galvanising solution, and paint as
necessary, to prevent corrosion.
d) Install supplied O-Rings into these
holes (
A9
).
e) Thread tubes through.
