Ironman Fitness 5600, Owner'S Manual

Page: 18 / 29

31
9
8
17
16
40
27
27
41
7
7
31
A B
(16) Lock Nut
1 PC
(27) Washer
2 PCS
(40) Hex Bolt
1 PC
Step 5:
Remove the Square End Cap (41) on the back of the Adjustable Boom (8), and set it aside for Step 8 .
Slide the Rear Rod (9) through the large round hole on the side of the Adjustable Boom (8). Secure
the Rear Rod (9) onto the Adjustable Boom (8) by using one Hex Bolt (40), two Washers (27) and one
Lock Nut (16). Tighten the hardware using the two Hex Wrenches provided.
Make sure the slots on
the Rear Rod (9) are facing forward.
Wrap both the Rubber Heel Holders (7) with a Steel Bracket (31). Slide them onto the ends of the
Rear Rod (9) until the lock teeth are wedged into the slot on the Rear Rod (9).
Note: Make sure the lock teeth are wedged into the slots on the Rear Rod (9) as shown in the
Fig. A and B before using the inversion table.
Attach the Spring Knob (17) onto the Adjustable Boom (8) by turning it in a Clockwise direction until it
is thoroughly tightened.
ASSEMBLY
16
Hardware:
Tool:
Hex Wrench
2 PCS