Ironman Fitness 5600, Owner'S Manual

Page: 14 / 29

The product weighs more than 44lbs / 20kgs and should
be assembled and moved by two or more people.
Step 1:
Attach two Front Foot Caps (53) and two Rear Foot Caps (49) to the Feet of the Front Frame (1)
and Rear Frame (3). Use a Bolt (51) and a Washer (27) to secure each Foot Cap to the frames.
Tighten the Bolts (51) with the Phillips Screwdriver Provided.
Align the holes of the Front Frame (1) and the Rear Frame (3), Secure the frames together using
two Bolts (38), Four Washers (13), and two Lock Nuts (15). Tighten the Bolts (38) with 6mm Allen
Wrench and the Lock Nuts (15) with Hex Wrench provided.
Then insert the Locking Pin (64) into the holes near the joint of the Front and Rear Frames (1,3).
Attach a Cap (62) onto both of the Lock Nuts (15).
ASSEMBLY
Hardware:
12
Tool:
Hex Wrench 1 PC
6mm Allen Wrench 1 PC
Phillips Screwdriver
1 PC
Phillips Screwdriver 1 PC