Ironman Fitness 5600, Owner'S Manual

Page: 19 / 29

#6
39
56
13
13
15
8
(13) Washer
4 PCS
(15) Lock Nut
2 PCS
(56) Bolt
2 PCS
Step 6:
Slide the Foot Bar (39) into the bottom of the Adjustable Boom (8) and align two of the holes on the
Foot Bar (39) with the two holes on the Adjustable Boom (8). Secure the Foot Bar (39) in place using
two Bolts (56), two Lock Nuts (15) and four Washers (13). Tighten the Bolts and the Lock Nuts with
the 6mm Allen Wrench and the Hex Wrench provided.
Note: The extra holes on the Foot Bar (39) are for adjusting the distance between the Rubber Heel
Holders (7) and the Foot Bar (39). The best set of holes to use will vary depending on the users’
personal preference.
Once the inversion table is completely assembled , try different positions for
the Foot Bar (39) if the first set of holes you try is not comfortable. Always thoroughly tighten the
hardware before testing different positions for the Foot Bar (39).
ASSEMBLY
Hardware:
Tool:
Hex Wrench
1 PC
Allen Wrench #6
1 PC
6mm Allen Wrench
1 PC
17