InfiRay Outdoor
•
Geni GL35R Series
•
Quick Start Guide
www.infirayouordoor.com
All rights reserved and shall not be copied and distributed in any form without written permission
➢
Image Settings:
adjust the image mode, display brightness, digital
zoom, image sharpness, image brightness, image contrast in the
shortcut menu (for more details, see the
Shortcut Menu
section).
➢
Standby Mode:
Briefly press the
P (6)
button to turn the standby mode
on/off. The standby mode can
➢
Power off:
to power off the device, long press
P (6)
button for 5s until
the shutdown option menu
appears. Make your selection
to switch
“√”
or
“
×
”
with a
short press of the
Z (5) / C (3)
button and confirm your
selection with the
M (4)
button. S
elect the “√”
to shut down and
“
×
”
to cancel.
➢
Reticle On:
click the
M (4)
button four times in a row while pressing
and holding the
Z (5) + C (3)
button to invoke the reticle function for the
first time use, then long press the
+
C (3)
button
simultaneously for 7 seconds to turn the reticle on. This function should
be activated when the reticle first enabled.
Attention
➢
When the reticle is turned off, all the operations related to it in the menu
will be hidden, including the adjustment of the reticle color and pattern
(in the shortcut menu), the options of zeroing and blind pixel correction
in the main menu.
9
Zeroing
Zeroing is recommended to be done at the temperature close to the
scope operating temperature.
Before implementing zeroing setting, please make sure that the reticle is
on and zeroing type is selected in the main menu.
➢
Mount the scope on your weapon.
➢
Set a target at 100m distance, and power on the scope.
➢
For the first use of the scope, please make sure that the reticle is on
before zeroing (refer to the instructions of section 6
Operation
).
➢
Long press the
M (4)
button on the home screen to enter the main
menu.
Summary of Contents for Geni Series
Page 1: ......
