www.irrobot.com
7. New Robot Replacement
To replace new robot, each new robot ID must be registered to each
machine as below.
7-1. New robot ID registration
1) Before entering the process, check whether the label number(1,2 or A, B) that is
stuck on the back of a robot is the same of the number(1,2 or A, B) that is stuck
on the Robot Control Board (Joystick, Turbo button, and Steering).
2) Turn on the main power switch and open the side door which control panel is
positioned.
3
) Push set button on the control panel for 2-3 seconds, will be shown
in the display.
- Push “Mode” button 12 times, shows.
- Push “Enter” button, shows and both “11” scores will be
shown on the score display as below.
4) When replace new robot, it needs to make new registration. Turn the robot “On”
and place the robot on the playfield.
※
Make sure that all other robots must turn “Off”, otherwise other robot will be
registered with same ID.
5) Put down the joystick and push the Turbo Button in the same time and wait for
10 ~ 20 seconds.
34
Same Number
Summary of Contents for Marubot Football League 4 Players
Page 45: ......
