background image

www.irrobot.com

3

Setting Up

Be sure to consult your nearest dealer when setting up, moving or transporting this product.

• This product should not be set up, moved or transported by any one other than an industry specialist.

Doing so could result in injury or product damage.

• When installing this product, set the 4 leg levelers evenly on the floor and make sure that the product

is installed stably in a horizontal position. Unstable installation may result in injury or accident.

• When installing this product, use caution not to apply undue force to opening and closing parts and

other movable parts. Otherwise, injury and accident may result, or the product may be damaged.

This product is an indoor game machine. Never set the game machine up outside.

• Setting this product up outside could result in accidents or equipment damages.

Do not set the game machine up near emergency exits.

• Doing so could block exits in time of emergency and could result in death or serious injury.

Do not set the game machine up.

1. In a place exposed to rain or moisture.
2. In a place exposed to direct sunlight.
3. In a place exposed to direct heat from air-conditioning and heating equipment, etc..
4. Near hazardous flammable substance such as thinner and kerosene .
• Otherwise an accident or malfunction may result.

Do not place containers holding chemicals or water on or near the game machine.

• Electrical shock or damage could be caused by water or foreign matter entering the inside of the machine.

Do not place objects near the ventilating holes.

• Doing so could cause the internal temperature to rise excessively, resulting in fire or equipment failure.

Do not bend the power cord by force or place heavy objects on it.

• Doing so could result in electrical shock or fire.

Never plug or unplug the power cord with wet hands .

• Doing so could result in electrical shock or fire.

Never unplug the game machine by pulling the power cord.

• Doing so could damage the cord, resulting in electrical shock or fire.

WARNING

Be sure to use indoor wiring for within the specified voltage range.
For extension cord, use indoor wiring of the specified rating or more.

• Failure to do so could result in fire or equipment failure.

Be sure to use the attached power cord.

• Otherwise a fire or machine trouble may result.

Never plug more than one cord at a time in the electrical receptacle.

• Doing so could result in fire or electrical shock.

Do not lay the power cord where people walk through. You may trip on or stumble over the cord.

• You may stumble down and get injured, or damage the power cord.

Be sure to ground this product.

• Otherwise an electrical shock or machine trouble may be caused.

Do not apply a strong force for moving the machine.

• Otherwise, it may result in an accident or breakage of the units.

Clearance of 100 mm (3.94in) or more should be created between the game machine and walls.

• Otherwise the machine (s) cannot be ventilated well, resulting in malfunction.

Do not change the DIP switch setting of this product to other than factory setting.

• Otherwise, the game can not be played properly.

CAUTION

Summary of Contents for Marubot Football League 4 Players














































Reviews: