www.irrobot.com
20
1) Position the power switch to "On" which is located on the bottom of the robot and lay down
it on the playground.
2.3 Handling the robot
♣
Remark : On/Off switch of the robot
2) Since very sensitive electronic parts are used for the machine and the robot, avoid any shock.
3) It is recommendable to play the game after 1~2 minutes from the power “On” because warm-
up is needed to avoid troubles if the machine is not operated in the long time.
4) The wheel of the robot can be worn away or changed its shape after long time operated.
Check its condition periodically and replace it.
If the wheel is cleaned out from time to time, it will drive more smoothly.
5) You have to check the power supplying pins periodically. They are needed to replace
immediately when they are run out. (Every 500plays are recommended)
The switch is Off
The switch is On
LED lamp is off
LED lamp is on
6) In case the storage battery inside of the robot is discharged and the robot is inactive, position
the power switch to “On” and place the robot on the power supplying board 1~2 minutes.
Make sure that the power of the machine should be “On” and not to play the game until full
charged.
Summary of Contents for Marubot Football League 4 Players
Page 45: ......
