www.irrobot.com
31
6. Trouble shooting
6.1 Power out
The machine is designed to use AC and DC electricity together according to parts
specifications. So, if the trouble seems on the power, consider the power source
first and fix it as below.
6.1.1 Power Sources
1) AC : Main Power, Fluorescent lightings, SMPS, Fans, and Air Blower
2) DC : Other Parts
6.1.2 All lights out
In this case, the most problems are on AC power. Check it as below.
1) Check the main power on the control panel. (Refer to page 24)
2) Check the main power cable between inlet and outlet.
3) Check the fuse in the Inlet socket.
4) Check the light on the multi outlet.
If the light is off, you need to replace the multi-outlet
6.1.3 Above Light s using AC power are on, but other parts are off.
In this case, the most problems are on DC power and there may be conductors
on the playground. If so, it make the short-circuit and fix it as below.
Check the SMPS and if it does not work properly, replace it. If it works, remove
conductors as below.
1) Turn off the power of the machine.
2) Open the Cover.
3) Clean the playground and remove the conductors.
4) Close the cover.
5) Turn on the power of the machine and test it
(When you turn off and on, you have to wait 10-15 seconds for warming
up.)
.
※
If you cannot fix the problem after above treats, call to your local dealer.
Summary of Contents for Marubot Football League 4 Players
Page 45: ......
