IQue Trinidad2200, Manual, Page: 21 / 55

Model2310 Ver.14.0
20
Reminder Messages
Check the pH
May appear on a regular schedule, i.e. every 7 days. Check pH with a test kit and adjust pH with the appropriate
chemicals.
Check the sanitizer
May appear on a regular schedule, i.e. every 7 days. Check sanitizer level and other water chemistry with a test
kit and adjust with the appropriate chemicals.
Clean the filter
May appear on a regular schedule, i.e. every 30 days. Clean the filter media as instructed by the manufacturer.
Test the GFCI (or RCD)
May appear on a regular schedule, i.e. every 30 days. The GFCI or RCD is an important safety device and must
be tested on a regular basis to verify its reliability. Every user should be trained to safely test the GFCI or RCD
associated with the hot tub installation. A GFCI or RCD will have a TEST and RESET button on it that allows a
user to verify proper function.
General maintenance helps.
R
eminder Messages can be suppressed by using the Preferences Menu. Reminder Messages can be chosen
individually by the Manufacturer. They may be disabled entirely, or there may be a limited
number of reminders on a specific model. The frequency of each reminder (i.e. 7 days) can be specified by the
Manufacturer. Reminder messages can be reset from the topside panel. Additional messages may appear on
specific systems.
Change the water
May appear on a regular schedule, i.e. every 90 days. Change the water in the spa on regular basis to maintain
proper chemical balance and sanitary conditions.
Clean the cover
May appear on a regular schedule, i.e. every 180 days. Vinyl covers should be cleaned and conditioned for
maximum life.
Treat the wood
May appear on a regular schedule, i.e. every 180 days.
Wood skirting and furniture should be cleaned and conditioned per the manufacturers instructions for maximum
life.
Change the filter
May appear on a regular schedule, i.e. every 365 days. Filters should be replaced occasionally to maintain proper
spa function and sanitary conditions. Reminder messages can be reset from the topside panel. Additional
messages may appear on specific systems.