IQue Trinidad2200, Manual

Page: 15 / 55

Model2310 Ver.14.0
14
Note: If power is interrupted to the system, Time-of-Day will be maintained for several days.
Main Filtration
Using the same navigation and adjustment as Setting the Time, Filter Cycles are set using a start time and a
duration. Each setting can be adjusted in 15-minute increments. The panel calculates the end time and displays it
automatically.
Filter Cycle 2 - Optional Filtration
Filter Cycle 2 is OFF by default.
Simply navigate to the Filter Cycle 2 line by pressing the Right Navigation Button, and when ―NO‖ is
highlighted, press Up or Down to toggle Filter Cycle 2 on and off. When Filter Cycle 2 is ON, it can be
adjusted in the same manner as Filter Cycle1 by navigating to the right. It is possible to overlap Filter Cycle
1 and Filter Cycle 2, which
will shorten overall filtration by the overlap amount.
Note: our factory delivered setting is the Filter cycle 2 is on, and the filter cycle time is Filter cycle1
The default is “FILTER 1” is 6:00AM to 10:00AM, “FILTER 2” is 6:00PM to 10:00PM)
Purge Cycles
In order to maintain sanitary conditions, as well as protect against freezing, secondary water devices will purge
water from their respective plumbing by running briefly at the beginning of each filter cycle. If the Filter Cycle 1
duration is set for 24 hours, enabling Filter Cycle 2 will initiate a purge when Filter Cycle 2 is programmed to
begin.
Invert Panel
Selecting Invert Panel will flip the display and the buttons so the panel can be easily operated from inside or
outside the hot tub.
Lock setting
The control can be restricted to prevent unwanted use or temperature adjustments. Locking the Panel prevents
the controller from being used, but all automatic functions are still active. Locking the Settings allows Jets and
other features to be used, but the Set Temperature and other programmed settings cannot be adjusted. Settings
Lock allows access to a reduced selection of menu items. These include Set Temperature, Invert, Lock, Utilities,
Information and Fault Log. They can be seen, but not changed or edited.