background image

19 

IQ Power Tools Limited Warranty 

  

New equipment sold by IQ Power Tools is warranted to be free from manufacturing de-
fects in normal service for a period of One (1) Year as indicated by the product from date 
of purchase by the original consumer purchaser. Component manufacturers offer sepa-
rate Warranty periods. 
  
This Warranty shall not apply to any parts that have been subjected to misuse or improper 
service, that have been damaged in transit or handling, or that have been altered or re-
paired by unauthorized representatives. This Warranty does not cover defects caused by 
or resulting from misuse, abuse, neglect or damage caused by accident or the failure to 
provide reasonable maintenance. 
  
This warranty is void if the product or any of its individual components is altered or modi-
fied by the purchaser or if the product is used in a manner or with a blade not recom-
mended by iQ Power Tools. 
  
Any claim arising under this Warranty must be submitted by the original purchaser within 
the Warranty period specified above, and shall include proof of purchase. During said 
Warranty period IQ Power Tools, at its option, either replace or repair, at no charge to the 
original purchaser, any parts or components that are found to be defective by IQ Power 
Tools. IQ Power Tools shall not be responsible or obligated to pay for freight or other 
transportation-related costs or expenses in connection with any defective products or 
components that are wither returned to IQ Power Tools facility or any authorized repair 
station and/or replacement products or components that are shipped from IQ Power 
Tools pursuant to this Warranty. 
  
Parts and labor needed to maintain products, and the replacement of components due to 
normal wear and tear, are the purchaser’s responsibility and are not covered by this War-
ranty. All products or components replaced under Warranty become the property of the 
manufacturer. All replacement parts will be  considered to be part of the original product 
and any Warranty on such parts will expire concurrently with this original Warranty. 
  
IQ Power Tools will pay for parts and labor in connection with Warranty repairs conducted 
by IQ Power Tools or its authorized repair center. Replacement parts, installed by anyone 
else will be provided without a charge for such replacement parts, but this Warranty will 
not apply to labor charges in connection therewith. 
  
IN NO EVENT SHALL ANY LIABILITY UNDER THIS WARRANTY EXCEED THE REPLACEMENT 
COST OF ANY DEFECTIVE PRODUCT OR COMPONENT THEREOF, AND IQ POWER TOOLS 
SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OR FOR ANY 
OTHER DAMAGE OR LOSS NOT EXPRESSLY ASSUMED AS SET FORTH HEREIN. The fore-
going constitutes an express Warranty on the terms set forth above and is the only War-
ranty of merchantability and/or fitness for a particular purpose or use being denied. This 
limited Warranty is expressly in lieu of all other Warranties, whether expressed or implied. 

P.O.

 

Box

 

7449

 

Moreno

 

Valley,

 

CA

 

92552

 

Tel:

 

888

274

7744

 

Fax

 

(951)

 

571

9708

 

www.iqpowertools.com

 

Summary of Contents for IQ 360




















Reviews: