IQ Power Tools IQ 360, Owner'S Manual & Operating Instructions

Page: 5 / 19

SAFETY
Read and follow ALL safety, operating and maintenance instructions. Failure to read and follow these instructions could
result in damage and/or reduced equipment life.
SAFETY MESSAGES:
The messages below are to inform the user about potential hazards that could lead to injury, death and/or equipment dam-
age. Each safety messages will be proceeded by one of the following (3) three words that indentify the severity of the mes-
sage.
DANGER
Not following instructions WILL lead to DEATH or SERIOUS INJURY
WARNING
Not following instructions COULD lead to DEATH or SERIOUS INJURY
CAUTION
Not following instruction CAN lead to injury
DAMAGE PREVENTION AND INFORMATION MESSAGES:
A Damage Prevention Message is to inform the user of important information and/or instructions that could lead to equip-
ment or other property damage if not followed. Information Messages convey information that pertains to the equipment
being used. Each message will be preceded by the work NOTE, as in the example below.
NOTE:
Equipment and/or property damage may result if these instructions are not followed.
GENERAL SAFETY PRECAUTIONS AND HAZARD SYMBOLS:
In order to prevent injury, the following safety precautions and symbols should be followed at all times!
Safety Precautions:
KEEP GUARDS IN PLACE.
In order to prevent injury, keep guards in place and in working order at all times.
REMOVE ADJUSTING KEYS AND WRENCHES.
Form a habit of checking to see that keys and adjusting wrenches are removed from the power tool before it is turned on.
KEEP WORK AREA CLEAN.
Cluttered work areas and benches invite accidents.
DO NOT USE IN DANGEROUS ENVIRONMENTS.
Do Not use power tools in damp or wet locations nor expose them to rain. Always keep the work area well lighted.
DO NOT FORCE THE TOOL.
A power tool will do a job better and safer operating at the rate for which it was designed.
USE THE RIGHT TOOL.
Do not force a tool or an attachment, to do a job that it was not designed to do.
NEVER CUT MAGNESIUM WITH THIS TOOL.
CAUTION
If the diamond blade shows signs of
fatigue cracking, replace the blade before
starting work.
5