MAINTENANCE & TROUBLE SHOOTING
TROUBLESHOOTING GUIDE:
TOOL WILL NOT START:
What’s
wrong?
What
to
do…
1.
Tool
not
plugged
in.
1.
Plug
in
saw.
2. Fuse blown or circuit breaker tripped.
3.
Have
cord
replaced by authorized service center.
3.
Brushes
worn
out
4.
Replace
brushes.
TOOL MAKES UNSATISFACTORY CUTS
What’s
wrong?
What
to
do…
1. Work piece incorrectly placed.
1. Firmly support work piece
BLADE DOES NOT COME UP TO SPEED
What’s
wrong?
What
to
do…
1. Extension cord too light or too long.
1. Replace the adequate size cord.
2.
Low
voltage.
2.
Contact your electric company.
3. Low generator voltage.
3. Check generator output voltage. Reduce number of tools
powered by the generator.
DOES NOT MAKE ACCURATE CUTS
What’s
wrong?
What
to
do…
1. Wheel is not square to fence.
1. Check and adjust.
2. Excessive force used to make cut.
2. Reduce cutting force, let the wheel do the work.
3.
Work
piece
moving.
3.
Make
sure
material is laying flat against the base.
CANNOT MOVE ARM
What’s
wrong?
What
to
do...
1. Lock down pin is engaged.
1. Push down slightly on the arm, pull down lock down pin
and raise arm.
MATERIAL MOVES DURING CUT
What’s
wrong?
What
to
do…
1. Excessive cutting force.
1. Reduce cutting force.
14
Summary of Contents for IQ 360
Page 2: ...NOTES 2 ...
Page 15: ...EXPLODED VIEW AND PARTS LIST 15 ...
Page 16: ...EXPLODED VIEW AND PARTS LIST 16 ...
Page 17: ...EXPLODED VIEW AND PARTS LIST 17 ...
