IQ Power Tools IQ 360, Owner'S Manual & Operating Instructions

Page: 8 / 19

UNPACKING, TRANSPORT and ASSEMBLY
UNPACKING

Your IQ 360 has been shipped from the factory thoroughly inspected. Only minimal assembly is required.

If not already done, remove the IQ 360 from the carton and place saw on top of Dust Tub and fasten .

Check contents with list below.
TRANSPORT
The IQ 360 weighs approximately sixty-five pounds making transport easy.
Due to its light construction, the IQ 360 is designed to be carried by the handles at the front & back of the saw. Simply
lock (1) the spring assisted Cutting Head in position (2), grasp the lower front and rear cross members (3,4). Lift and
handle the IQ 360 to the desired location.
Item # Quantity Description
1 one IQ 360
2 one Dust Tub
3 one Cutting Fence
4 one Filter
5 one Owner’s Manual
6 one Warranty Card
CONTENTS:
CAUTION
Always observe safe lifting practices when lifting the IQ 360.
NOTE
Lock the Cutting Head in the DOWN position.
8