Exit the sub-menu
Auxiliary Settings / Enter to View/Adjust
•
Option 1 Input Terminals
(These are available programmable inputs that can be programmed to take on the function that is
selected when the Option 1 terminal is activated)
o
Open
o
Reverse
o
Shadow
o
Fire
o
Close
o
Photo Eye Close (stops the gate from closing but doesn’t reverse the gate)
o
Aux Out 1 (momentary activation of Aux 1 output relay)
o
Aux Out 2 (momentary activation of Aux 2 output relay)
o
Toggle Aux 1 (toggles Aux 1 output relay on/off)
o
Toggle Aux 2 (toggles Aux 2 output relay on/off)
o
7-day Open Timer Off (turns off the 7-day open timer until the next open schedule)
o
Hold Open (momentary contact will hold open gate and release it)
•
Aux 1 Output Relay
•
Aux 2 Output Relay
(These are available options for the Aux 1/2 output relays to perform if selected)
o
Pulse on Open Limit (a 2 second relay activation on the open limit)
o
Pulse on Close Limit (a 2 second relay activation on the close limit)
o
Hold on Open Limit (latches the relay on the open limit)
o
Hold on Close Limit (latches the relay on the close limit)
o
Pulse on Motor Open (a 2 second relay activation when gate is opening)
o
Pulse on Motor Close (a 2 second relay activation when gate is closing)
o
Hold on Motor Open (latches the relay when gate is opening)
o
Hold on Motor Close (latches the relay when gate is closing)
o
Hold on UL-325 Alarm (latches the relay upon a UL-325 alarm)
o
Aux Input Received (activates the relay when the Aux input is in use)
o
AC Power Loss (activates the relay upon AC power loss detection which is
measured when the gate receives less than 23.5 VDC)
o
Low DC Power (activate the relay upon low DC power detection, a value of equal to
or less than 75% of full power supplied)
o
Thermostat Engaged (activates the relay when the thermostat is engaged)
o
Maintenance Request (activates the relay upon a maintenance request)
o
Hold on Motor Run (activates the relay whenever the gate is running)
•
MRT Exp Limit Option =OFF, ON (This will signal a limit switch in its last direction if the
Maximum Run Timer expires)
20
Option 1
