Calimet CM9-975 Vehicle Exit Wand
Package Includes
Determine the Location of the Wand
Note: Before you permanently install the exit wand, you should determine where to place the
wand and prepare a PVC conduit to route the cable to the gate operator circuit board. The
conduit protects the cable from water, lawn mowers, weed eaters and grazing animals.
The distance from the wand to the gate’s full open position has to be more than 25 ft.
The radius of the sensing range is 4-12 ft, so install the wand near the driveway within that
range to ensure the wand can sense the vehicle moving past it.
Leave 5 ft of cable from the ground to the gate operator circuit board. Thus, the distance from
the wand to the control box should not exceed 45 ft.
