![background image](http://html1.mh-extra.com/html/calimet/cm9-975/cm9-975_quick-start-manual_3453324002.webp)
Installation
Once the location of the wand has been determined, you can start installing the wand. Dig a
hole approximately 12 inches deep and 24 inches long within 2 ft and parallel to the edge of the
driveway.
Next, dig a trench from this hole to a spot under the gate operator circuit board to run the
cable from the wand to the circuit board. The size of the trench is related to the size of the PVC
conduit.