6. ADVANCED OPERATION
Question 1:
How to set up the motion detection area and its sensitivity? How to record into the SD
card for 30 seconds when the motion has been activated and use the Microsoft
Internet Explorer to view the recorded files?
◇
Set up the motion detection
1. Click the
Application
button in the home page.
2. Click the
Motion detection
button on the left side of the page to enter the “Motion
Detection” page.
3. Click and drag the mouse left button across a targeted zone to draw a red rectangle on
the image. You can also draw the other targeted zones as you wish.
4. Please
Enable
the motion detection function.
5. Set up the sensitivity level from: Lowest, Low, Medium and High to Highest.
6. Click the
Submit
button to submit the setting.
◇
Recording the images into an SD card while the motion detection function is
working
1. Click the
Application
button in the home page.
2. Click the
Enable
button below the ALARM item on the left side of the page to enter the
“Alarm Application Enable Setting” page.
3. Tick on “
Enable Alarm-Save Into SD Card
” to activate it.
4. Click the
Submit
button to submit the setting.
NOTE:
Please remember to insert the SD card into the built-in SD slot of the unit first.
◇
Set the recording time (the AVI duration) of the SD card
1. Click the
Application
button in the home page into the “SD Card Application Setting”
page.
2. Choose the
AVI Duration
from the drop-down list.
If you want to record the file into the SD card for 30 seconds, please choose 30 seconds.
3. Click the
Submit
button to submit the setting.
82
Summary of Contents for VE-3500
Page 2: ......
Page 93: ...Figure 6 91 ...
